home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Library
/
RoseWare - Network Support Library.iso
/
print
/
prtmgr.arc
/
NETPRINT.HLP
< prev
next >
Wrap
Text File
|
1989-03-30
|
4KB
|
72 lines
┌───────────────────────────┐
│ Saber Print Manager Help │
┌───────────┐ └───────────────────────────┘
│ Main Menu │
└┬──────────┘
├──────────────Print To: Directs printing to either the network or to the
│ local printer.
├───────Current Printer: Selects the current network or local printer number.
│ Network printer numbers are the numbers assigned by
│ the Netware Operating System. If the printer
│ definition file NETPRINT.PSF is defined, you will be
│ presented with a list of printers corresponding to
│ printer numbers 0-7. If the NETPRINT.PSF file is
│ not defined, printer numbers have no meaning for
│ local printers.
├───Set Network Options: Defines miscellaneous spooling options when printing
│ to network printers.
├─Send Printer Commands: Sends pre-defined setup strings from the printer
│ definition file, NETPRINT.PSF, to either the network
│ or local printer.
├────Print Network File: Prints a file residing on the network to the current
│ default network printer.
├───Display Print Queue: Displays the print queue for the current network
│ printer or a selected network printer.
├─Release Spooled Print: Send network spooled print to printer. Useful when
│ Timeout = None.
└──Cancel Spooled Print: Delete any network print that has not been released
manually or through Novell's auto timeout.
┌──────────────────────┐
│ Network Options Menu │
└┬─────────────────────┘
├────────Server Printer: Select the network printer number which will be used
│ when output is sent to the selected LPT port. This
│ is the same as the Current Printer setting from the
│ Main Menu when spooling is active.
├────────────────Server: Select the server to which the printer number is
│ connected. Only servers to which you are currently
│ attached will be displayed.
├──────────────────Form: Select the form number for printed output.
├────────────────Copies: Select the number of copies to be printed for all
│ output sent to the server printer.
├───────────────Timeout: Select a number of minutes after which, if no other
│ printing is performed, any output sent to the
│ network printer will be released for printing.
├─────────────Form Feed: Select whether a form feed is to be sent after
│ printing is released.
├────────────────Banner: Select whether a banner page is to be printed before
│ each print release.
├─────────Tab Expansion: Select whether tab characters are to be converted to
│ spaces during printing or whether they are to be
│ sent as is. ALWAYS SET TO NO unless you know this
│ option is required.
├──────────────Tab Size: Tab size setting for above option.
├──────────────From LPT: Select which LPT port assignment is to be used for
│ network printing. For Netware 2.1 and above,
│ changing the LPT port number will automatically
│ change all other settings to those set for that LPT
│ port. It will also make the LPT port the default
│ port for network printer output.
└──────Endspool @ Close: Automatically release print based upon DOS 3.1 auto
print release.
┌─────────────────────┐
│ Print Queue Display │
└┬────────────────────┘
├────────────Delete Key: Delete the highlighted queue entry. You will not be
│ allowed to delete the queue entry if it is not your
│ print job and you do not have supervisor rights.
└─────────PgDn/PgUp Key: Select which printer number for which to display the
queue. The default is always the current network
printer number.